Wednesday, October 26, 2016

How to sew a faux fur crossbody bag

I got 3 yards of faux leather or pleather for making 4 in 1 asymmetrical clutch 2 years ago. I had a lot of leftover from the project that I wanted to use it for some other project. I was using an H&M black  crossbody handbag for a long time which was gifted to me by my cousin sister and it was so comfortable.When I wanted a bag similar to that I couldn't find any that suits my need.(It should be  big enough to hold my 500ml water bottle and the bag should not weigh too much). As I couldn't find any weightless bag I settled with a teal handbag from Walmart as a replacement until I find a new handbag that suits my need. My 500 ml water bottle was poking out in that bag and so I thought why not try sewing a handbag.Finally, I came up with the idea of using the pleather for making a crossbody bag combining it with faux fur. I thought this project will be perfect for this time of the year  and  it is so simple that anyone can sew this bag easily. It is just a bigger version of sewing a zipper pouch. Let's see how.

free cross body bag pattern using faux fur and faux leather


Materials Used:
Pleather or Faux leather -approx 3/4 yard
Faux fur - 1/2 yard 
Solid cotton lining - 1/2 yard
Matching sewing thread
Metallic zipper - 14"
D-ring - 2
Swivel clasps - 2
Buckle - 1
Fabric Scissors
Sewing machine
Magnetic clasps - 2
Vinyl glue
Iron

Measurements:

Pleather or Faux Leather 

Outer panel for front side - 13.5" X 14"
Outer panel for back side - 13.5" X 4.5"
D-ring holder loop 2 pieces - 2.5" X 5"
Shoulder Strap - 2.5" X 55"

Faux Fur

2 pieces - 13.5" X 10.5" (One for front pocket and another for back side)

Solid cotton lining 

2 pieces - 13.5" X 14"(For inside of the bag)
1 piece - 13.5" X 10.5" (Front pocket lining)
Inner pocket - 8" X 5.5"


Step 1: Prepare the front pocket 

Sew one piece of faux fur with one piece of front pocket lining with right sides facing each other on one side with 1/2" seam allowance. Turn the lining to the wrong side of the faux fur. 







Step 2: Attaching the magnetic clasps

Attach one side of the two magnetic clasps to the front pocket and the other side to the Faux leather piece(Outer panel for front side). For detailed step on how to attach this magnetic clasp, you can visit step 3 of How to sew Mini Dora bag for toddlers. Instead of using interfacing,  I used a piece of faux leather as backing for the clasps. 









Step 3: Prepare loops for D-rings

Instead of sewing and turning inside out as we normally do, here we are just going to fold the edges 1/4" inside on each side and sew together to secure. Sew another stitch on the other side. I am not sure if this is the right way to sew pleather or faux leather. As I thought the normal method will be intimidating for this kind of fabric, I decided to go with  this route. 


Step 4: Preparing the back panel 

Sew the faux leather (Outer panel for back side) and one piece of faux fur on one side with right sides facing each other with 1/2" seam allowance. Now the back panel is ready. 



Step 5: Attaching the front and back panel to the zipper. 

Now pin back panel, D-ring loop with D-ring(Approx 3" away from the edge), zipper( the wrong side facing the lining) and the lining together. Use clothespins for pinning as shown below. Sew together. Sew carefully when sewing the loop as it will be bulky if needed use hand wheel and move slowly in that area instead pedaling. 

In the same way, repeat for the front panel, instead of pinning the D-ring loop from the left, this time pin it 3" away from the right edge. 

Finish both the sides with a top stitch. 








Step 6: Sew the inner pocket 

Fold and sew the top side of the pocket. Fold and iron other three sides of the pocket. Sew the bottom side of the pocket in the center of the back side lining(right side) with 1/4" seam allowance and then fold the pocket (wrong sides facing each other) and sew on the sides to secure the pocket. 



Step 7: Sewing the front and back panel together. 

Combine the lining together on one side and the outer panels on one side. Pin all around on the edges.  Open the zipper 3/4 way. Sew all around with 1/2" seam allowance leaving the large portion of the bottom lining without sewing. Use that portion to turn the whole bag inside out. Then fold and iron the bottom part of the lining and topstitch to secure. Now insert the bottom part into the outer panel.


Step 8: Sewing shoulder strap 

I followed the same method I did for D-ring. After cutting a long strip of fabric, (Attach two pieces if you don't have enough length) fold the piece into half and first sew left edge with a topstitch then as discussed in step 3, fold around 1/4" inside on both the edges and secure it with the clothespin. Then sew along to secure. The shoulder strap is now ready. 





Step 9: Attaching the shoulder strap to the buckle and swivel clasps. 

First, thread the shoulder strap into the center part of the buckle and secure it with stitches. My Machine could handle only four layers of faux leather folded so I just folded once and secured it with stitches then I folded the edges and used vinyl glue to secure it. 

Then thread one of the swivel clasp. Then thread the other end of the shoulder strap through the center of the buckle. Thread the other swivel clasp and fold the other end and secure it with stitches. I did the same for the other end. Used glue to fold and secure the edge. That's it. Once the glue dries, attach the shoulder strap to the D-ring and your Faux fur crossbody bag is complete. 









What do you think about this bag? Will you attempt sewing this bag? If you planning for handmade gifts this season, this would be a perfect gift. Tell me what you think in the comments below. As always I will be happy to hear from you. 

Other bag/pouch projects you might like, 




SaveSave

17 comments:

  1. Cute bag!! I've got a Craft Gossip post scheduled for this evening that features your tutorial: http://sewing.craftgossip.com/?p=90280 --Anne

    ReplyDelete
  2. Love it! I've got some soft curly brown & some faux suede plenty of close pins to hold things instead of pins of the expensive clips. Have to pick up the hardware bits & I'll be good to go- have a whole wkend to my self sew perfect timing!-thanks

    ReplyDelete
  3. This bag is so cool! I love the look of the faux fur, and it's so perfect for fall and winter! Thanks for linking up with Creative Spark last week; I chose your bag as one of my Feature Picks this week. I hope you'll stop by and link up again!

    ReplyDelete
  4. What a great bag! It's so cute. I love the faux fur and how you used it with the pleather. #HomeMattersParty

    ReplyDelete
  5. A great looking bag, Sahana, and perfect right now for your cool weather.

    ReplyDelete
  6. This is a great transformation.

    Thank you for sharing this with us on the #HomeMattersParty.

    ReplyDelete
  7. What a beautiful bag! You are so talented!! #HomeMattersParty

    ReplyDelete
  8. You are so talented! You look so cute in your brown boots, goes perfect!

    ReplyDelete
  9. WOW! What a great bag. ANd you make it look so easy. Wha ta fun project. It would make a fantastic Christmas gift. Thanks for sharing with the #HomeMattersParty

    ReplyDelete
  10. Wow, I love this! Found it on the #HomeMattersParty and sure am glad :)

    ReplyDelete
  11. Your crossbody bag turned out so cute, Sahana! I have never sewn with pleather before, but now, I want to give it a try. Thanks for sharing at the #HomeMattersParty :)

    ~Lorelai
    Life With Lorelai

    ReplyDelete
  12. I can't believe you MADE that! It's amazing! And I LOVE that Dora backpack - my girls would adore that - Dora is their favorite!!! #homemattersparty

    ReplyDelete
  13. You are so talented and creative. You inspire me to sign up for sewing classes this winter. #HomeMattersParty

    ReplyDelete
  14. Many fashionistas worldwide are probably fairly familiar with Bottega Veneta, the leading premier designer label that produces soft woven leather bags.luxury travel bag

    ReplyDelete
  15. This comment has been removed by a blog administrator.

    ReplyDelete
  16. This comment has been removed by the author.

    ReplyDelete