Sunday, February 16, 2020

DIY Cardboard kids play kitchen

I noticed that my son enjoys playing in the play kitchen when we visited our cousin's place for a vacation and also during playdates at our friend's house. So, I was thinking about whether I should buy him one or make him one. While this thought was running at the back of my mind, I found this cardboard box in our storage room and the moment I saw the box it screamed "DIY play kitchen". The shape was perfect for the layout I wanted and here is how I made this play kitchen.

DIY play kitchen using cardboard simple tips and hacks to make it colorful



Materials used :
Cardboard box
Craft knife or box cutter
Marker
Ruler
Plastic mat for handles
Duck tape
Texture paint
Paintbrush
Bottle caps & screw for knobs
Page protector for Oven door
Plastic box for Sink
Dispenser pump for sink tap from old/empty cream or soap bottle
Hot glue gun & glue sticks
Awl
Moldable plastic

Step 1: Close the top portion of the cardboard with hot glue. Design and mark the layout for the oven, refrigerator, drawer, sink and any other kinds of stuff(like knobs) based on your requirement using a ruler and a marker. For the sink, trace the outline of the plastic box you planned to use as a sink on the top of the cardboard box.


Step 2: Use a box cutter or craft knife and cut the areas where necessary. Make slits for inserting handles and insert the handles and glue them in place. (More details in next step)





Step 3: Inserting Handles

I used plastic handles that come in the packaging when you buy things like toys, sheets, etc for oven and drawer. 




For that, make slits and insert the edges and use hot glue to make them stay in place. 


If you don't have those, you can always make your own handles using plastic cutting mat from the dollar store (they come 2 in a pack) or any plastic disposable containers. Cut the plastic for the required length and sandwich in between the duck tape. Use the same method as above to insert it and glue it in place. 





Step 4: Make partitions using the cardboard inside the cardboard box to separate oven and drawer space and then a separation for the refrigerator from oven and drawer. Lastly, separation for the freezer and the refrigerator. I used another cardboard box to cut the cardboard for the partitions. I used the ruler to measure the height and width and used hot glue to secure it in place. 

Black lines are the areas I used extra cardboard piece for partition.

Step 5: Build the drawer. 

Measure the area inside the cut space the drawer and design your drawer accordingly. I glued the sides part of the drawer 0.25" away from the edges and then measured the distance between them to make the back part of drawer. Once this is done, cover the bottom area with another cardboard piece. Use hot glue for gluing the pieces together. 


To avoid the drawer, dropping to the base of the cardboard box, I stacked a few pieces of cardboard to match the height of the bottom line of the drawer and glued them in the center. 


Also, I thought a drawer is a good option for the play kitchen but the kids may pull them out completely. So to prevent that scenario, I used ribbon and four holes (two in the back of the drawer and two on the cardboard box and connected them using the ribbon as shown below. 




Step 6: Use duct tape to cover the edges of the oven door, drawer, refrigerator, etc. I covered them entirely as I preferred that look. But this step is totally optional.

For the over door, I covered the inside with duct tape as shown below, and then used a page protector and more tape to secure it in place. After covering the areas needed, I used folk art texture paint to cover the remaining areas. Just one coat was sufficient. 






Step 7: Draw the burners using black paint and paintbrush. Draw an outline using a pencil and then fill in with the paint. I used a gray paint marker and gave an outline to make it pop. 

Step 8: Attach the sink using hot glue. I spray painted a green dollar store plastic box white to use it as a sink. 

Make a hole using an awl for the pump dispenser(Faucet) and add a bit of hot glue to the bottom and glue it in place as well. 

Step 9:  Make twisting knobs

Use bottle caps, screws and something to stop the screw from coming out like a cork stopper to make twisting knobs. Use hot-glue to glue the screws on to the back of the bottle cap. Allow it to dry. Paint the bottle cap if needed using multi-surface paint. Use an awl to poke holes for the screws. Insert the caps and then use cork stopper or moldable plastic to make a stopper to avoid knobs from falling off while twisting. Use a paint pen to write "High, Medium & low" and oven temperatures. 






Step 10: Adding a backsplash

Fold a poster board into half and glue cardboard piece to fit the length and width of the backsplash so that the cardboard piece is sandwiched in between the poster board. Use hot-glue to glue the backsplash to the back of the cardboard kitchen. Use duct tape to make it more secure and strong. 
Decorate it as desired.

I covered it entirely in black duck tape. I took a photo of my stovetop buttons, printed it out and used clear contact paper to glue it on to the backsplash to mimic the stove range I have. Also, used a piece of marble contact paper as a backsplash for the sink. That's it. The play kitchen is done. Woohoo!!











Here are a few clips of my son enjoying the new play kitchen. 





Did you enjoy the step by step tutorial? Don't get intimidated by the supplies I used. Since I am a crafter I have a lot of these supplies in my stash but you can always switch it up with the things you already have. I tried to reuse pieces of stuff found in packaging for handles, juice bottle cap for knobs, soap dispenser as faucet, etc which is commonly found in most households to make it easy for whoever wants to recreate this kitchen. I hope you will have fun making your own play kitchen by taking inspiration from this post. If you do so, I will be happy to see your picture. Please send them to any of my social media accounts.

Other DIYs you might like, 




8 comments:

  1. Incredible. Sahana. I always do some craft . Admire and inspiring
    God bless. Make money out of it.
    Good wishes
    Rajam athai

    ReplyDelete
  2. Looks great. What a wonderful gift for your son.

    ReplyDelete
  3. Wow, you had quite the vision to create this play kitchen. Looks like lots of fun! Pinned. Here from your party.

    ReplyDelete
  4. "The sink regulator is factory-made in several styles. the fabric used for the merchandise is additionally totally different. Chrome, copper, brass, bronze and stainless-steel square measure some materials used for producing the sink regulator. Click Here to read more.
    Or,
    Read more at:
    https://matforkitchenfloor.com
    Farmhouse kitchen floor mats

    ReplyDelete
  5. TiviMate is a versatile IPTV player for Android devices, offering a rich set of features tailored for an optimal viewing experience. It supports multiple playlists, scheduled recordings, and advanced EPG (Electronic Program Guide) integration. The intuitive interface do you think tivimate companion is necessary?
    , customizable options, and seamless playback make it a favorite among IPTV enthusiasts. TiviMate's premium version unlocks additional features like data synchronization across devices, enhancing user convenience and functionality.





    ReplyDelete
  6. The TiviMate Companion app enhances your IPTV experience by providing seamless integration with TiviMate. It facilitates easy setup, management of playlists, and remote control capabilities across Android TV, Fire TV, and mobile devices. Download and optimize your viewing with TiviMate Companion for enhanced IPTV functionality.

    ReplyDelete
  7. Creating a DIY cardboard play kitchen for kids is a fun and imaginative project that provides endless entertainment. With just a few cardboard boxes, paint, and some creativity, you can build a play kitchen that will inspire hours of pretend play. From a stovetop with dials to a mini fridge and even a sink, the possibilities are endless. Not only is this project budget-friendly, but it also encourages kids to engage in creative play, helping them develop their motor skills and imagination.

    To find more DIY projects and tools to help bring your ideas to life, visit https://deltaexecuter.com/

    ReplyDelete
  8. Fireboy and Watergirl Game is known for its cooperative mechanics, where two players can team up and control each character. This makes it perfect for multiplayer play, either online or locally.

    ReplyDelete